WA6 Series
About WA6 Series
The Burks WA6 series is a self-priming centrifugal pump for clean-liquid service. It primes quickly and stays primed, so flapper and check valves on the suction pipe are recommended but not required. It runs at 3500 RPM on 60 Hz power.
Applications
Lawn sprinkling
Pressure boosting
Sprinkler systems
Light irrigation
Dewatering clean liquids
Transfer from underground storage
Features and Benefits
Fast priming and stays primed
Non-overloading, with the same performance at all catalog ratings
Continuous duty motors
Leak-proof, self-adjusting mechanical shaft seal
Cast iron casing with suction, discharge, prime, vacuum gauge, and drain tappings
All bronze or all iron construction available
Glass-filled Noryl® enclosed impeller with a molded-in brass insert
Every pump is factory tested and meets Hydraulic Institute standards
Operating Conditions
Inlet pressure is 100 PSI (689 kPa) and casing working pressure is 200 PSI (1379 kPa).
Motor Information
Single phase motors are 1 HP to 2 HP at 115/230 V, and 3 HP at 230 V. Three phase motors are 1 HP to 3 HP at 208-230/460 V. All single phase ODP and TEFC motors have built-in overload protection. All three phase and explosion proof motors must be installed with a magnetic starter that provides full three-leg protection. Using the wrong starter or overloads will void the motor warranty.
88 products
Related Products and Parts
Popular Series
Series associated to this product and brand
Shop Burks PumpCatalog with Confidence
Every order is secured with SSL encryption and trusted payment processing. Your information is always safe.